De LA4X is een digitale versterker ontworpen voor diverse L-Acoustics luidsprekers.
vermogen: 4 x 1000w
Gewicht: 11.3kg
Architecture
4 x 4
Output Power
4 x 1000 W at 4 and 8 ohms
Power supply
Universal SMPS with PFC
Inputs
AVB, AES, Analog
Height
2U
Network
Milan-certified
Amplification and power supply
Amplification class
Class D
Output power, all channels loaded
4 x 1000 W at 4 ohms
4 x 1000 W at 8 ohms
Power supply model
Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating
100 V – 240 V ±10%, 50-60 Hz
Audio specifications
Frequency response (20 Hz – 20 kHz, 8 Ω load)
± 0.25 dB
Distortion THD+N (20 Hz – 10 kHz, 8 Ω load)
< 0.05 %
Output dynamic range (20 Hz – 20 kHz, 8 Ω, A-weigthed)
> 110 dB
Noise level (20 Hz – 20 kHz, 8 Ω, A-weigthed)
< -71 dBV
Latency (analog/digital inputs)
Standard: 3.84 ms
Low latency: 0.84 ms
DSP
Digital Signal Processor (DSP)
SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing
Flexible 4×4 routing matrix
Per output channel
Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters
Array morphing, Air absorption compensation filters
Internal IIR and FIR EQ algorithms
L-DRIVE advanced system protection
Output delay from 0 to 1000 ms
Circuits protection
Mains and power supply
Over and under voltage / over temperature / overcurrent
Power outputs
Overcurrent / short circuit / over temperature
Remote control and monitoring
Network connection
Dual-port Ethernet Gigabit interface
L-Acoustics remote control software
LA Network Manager
Third-party management solutions
QSC® / SNMP / Extron® / Crestron®
Operating conditions
Temperature
0º C / 32º F to +50º C / 122º F
Physical data
Height
2U
Weight
11.3 kg / 24.9 lb
Protection rating
IP30
Reviews
There are no reviews yet.